Waterproof PG Cable Gland will be more applied to the waterproof use of power lines, in many environments also have to use such things, such as street lights, boats, sprinklers and so on. Because these things also use electricity, but they are always in contact with water, not close to the water on the ground, or rainwater, will also affect the circuit, because when laying the line, there are often many joints, but if there is such a special waterproof joint, it can play a very good protection. But there is a premise that we must choose reliable brand products.

Why do we say that, because water itself has a strong permeability and high pressure, and although the surface of waterproof joints are waterproof materials, but inevitably there will be cracks, so there will be water, especially in places with very large water content, it is difficult to meet the requirements. But the standard manufacturer not only uses waterproof material, but also does a lot of technical treatment at the interface and other cracks, so it will get a good effect in the end.

As far as the PG Cable Gland on the market are concerned, they can be divided into many grades, so when choosing, they should also pay attention to the environment they use. The first grade only achieves the function of waterproof droplets, i.e. it is barely used in places where there is less rainwater. If it is rainy, it is not suitable for use. . In addition, although some joints can be waterproof, when a certain degree of inclination is reached, water will naturally enter, and some are used underwater, which requires the highest level of waterproof products, only in this way can we get good performance.

Material and performance of PG Cable Gland

PG Cable Gland is mainly used to connect equipment between two disconnected cables. Their overall connectivity is good, and they have a certain degree of tightness. Therefore, in use, there will be no leakage due to improper use of cable and other phenomena, and the safety performance is relatively up to standard.

Copper Cable Gland is also called cable head in power fittings. In the course of its use, it is necessary to flatten the two interface pieces of the cable to be connected before connecting them, so as to make the broken wires of each area connected as a whole, and those connectors used for intermediate connection points are called cables. Connectors are sometimes referred to as terminal heads.

The overall material of cable joint is mostly made of epoxy resin, so it can be used in indoor and outdoor environment, and has certain corrosion resistance. In daily life, the most common and commonly used is the kind of heat-shrinkable cable connector, which can be heated according to the size of the connecting cable, and then connected to fix its overall connectivity, compact at the same time to prevent leakage and other situations.

The material of the joint can be divided according to the user's use area. There are two kinds of material, plastic material and metal material. In many cases, the Copper Cable Gland can customize the waterproof joint and anti-bending joint of different hole modes according to the customer's needs. Using this Copper Cable Gland to connect the broken wires can effectively ensure the unblocked lines between the cables, and has a certain degree of sealing. In the use process, good insulation effect can be achieved.