Cable glands are mainly used to connect the two broken cables between the cable gland equipment supplies, its overall connectivity is good, and has a certain degree of tightness, so in use, not due to improper use of cables, resulting in leakage and other phenomena, safety performance is more up to standard.

PG Cable Gland is also called cable head in the electrical fittings. In the process of using it, it needs to flatten the two interface slices of the cable to be connected, and then connect them to make the broken wires in each area become a whole. The connectors used in the middle connection point are called cable. Connectors are sometimes referred to as terminal heads by Cable Gland Manufacturers.

The overall material of PG Cable Gland is mostly made of epoxy resin casting, so both indoor and outdoor environments can be used in use, and has a certain corrosion resistance. In daily life, the most common and commonly used is that kind of heat-shrinkable cable connector, which can be heated according to the size of the connection cable in use, in order to fix its overall connectivity, tight and at the same time has a certain degree of leakage prevention.

The material of the Cable Gland can be divided according to the user's use area. There are two kinds of plastic material and metal material. In many cases, the metal cable gland can be customized according to the customer's needs. Using this kind of cable gland to connect the broken wires can effectively ensure the smooth line between the cables, and has a certain degree of sealing, in the course of use, can achieve good insulation effect.

Usually, the PG Cable Gland is mainly laid in the cable line, in order to form a certain connectivity between the cable, so use this kind of better sealing cable connector to connect the two ends, thus forming a whole, so as to facilitate future circuit transmission, and ensure that it is in the transmission process. There will be no failure.

At present, Cable Gland Manufacturers have certain standards and requirements for the cables they produce. The specifications and sizes of the cables are different because of the different areas they use. Therefore, when the cables can not reach a certain length, it is necessary to use such cable connectors to connect the two ends of the cables. Line connection, so as to achieve the purpose of use.

Due to the relatively large number of types and specifications of the cable glands, it can be divided into outdoor and indoor use of two major categories of products, and according to its material can be divided into heat shrinkable type and dry package type, as well as epoxy resin casting type of cable gland. One of the most commonly used connectors on the market is the thermal shrinkable cable connector, which can be divided into copper connector and aluminum connector according to its texture.

The main purpose of using cable connectors to connect cables is to make the current in the area supplied by the cable flow normally, smooth the line and ensure the good sealing of the cable connection. Therefore, this kind of cable connector is often used in the connection between cables, and has good insulation effect. This cable gland from Cable Gland Manufacturers is safe and reliable to use, so it has become a common wiring material for many power departments.