The quality testing standard of nylon cable tie
1. Mechanical properties of nylon cable ties
Nylon cable ties are an engineering plastic. Nylon 66 injection molded nylon cable ties have excellent mechanical properties. Different types of China Cable Tie have different lap diameters and tensile strengths (pull strength) (see nylon cable ties specification table). .
2. Temperature affects nylon cable ties
Nylon cable ties maintain excellent mechanical properties and aging resistance over a wide temperature range (-40~85℃).
3. Humidity affects nylon cable ties
The nylon China Cable Tie maintain excellent mechanical properties in a humid environment. The nylon ties are hygroscopic, have increased moisture (water content), have higher elongation and impact strength, but have a reduced tensile strength and rigidity.
4. Electrical characteristics and smoldering
Nylon has good insulation, electrical rated temperature less than 105℃ does not affect its performance, resistance up to UL measurement 94V-2.
5. Chemical resistance
Nylon cable ties have excellent chemical resistance, but strong acid and phenolic chemicals have a great influence on their properties.
6. China Cable Tie has the strong cold weather resistance
In the extremely cold and dry weather, the nylon cable tie will be brittle when it is used. At this time, it can be soaked in hot water for one night, and then it will not be brittle. In addition, in the process of producing a nylon cable tie, the brittle water can be treated by a boiled water process. Also, pay attention to the control of temperature and speed during the production process. Cable Ties Suppliers suggested that do not let the material in the screw take too long to cause the material to burn.

Operation of nylon cable tie
1. Nylon cable ties are hygroscopic. Cable Ties Suppliers suggested that do not open the package before use. After opening the package in a humid environment, try to use up within 12 hours, or repack the unused nylon cable ties to avoid affecting the nylon cable ties during operation. Tensile strength and rigidity.
2. It would not over the tensile strength of nylon cable tie itself when operation.
3. Cable Ties Suppliers said that the ring diameter of the bundled object is smaller than the diameter of the nylon cable tie. The diameter of the nylon cable tie is not convenient to operate and the strapping is not fastened. The remaining length of the strap after tightening is not less than 100MM.
4. The surface of the bundled object cannot have sharp corners
5. There are two ways to use a nylon cable tie, one is manually hand-tight, and the other is a cable tie gun to tighten and cut. In the case of using a cable tie gun, it is necessary to adjust the strength of the cable tie gun. The specific condition depends on the size of the cable tie, the width and the thickness, and the thickness to determine the strength of the cable tie gun.