Sockets are mainly used in power lines, because it is related to electricity so its safety needs considerable attention, especially in the state of industrial dust, water mist or electric spark. The use of sockets is more prudent and high standard. The following is a kind of waterproof Industrial Plugs And Sockets used in industry.

How to use waterproof Industrial Plugs And Sockets

1. Unplug the industrial plug shell screw, open the industrial plug and reconnect the connecting screw of the wire and plug. If the two wire without screws, the rubber plug should be taken out of the industrial plug piece to connect the wire to the industrial plug piece or press well. After the treatment, the two plug pieces are reused in the plug.

2. After the power line of the root of the plug is broken in the insulated leather, it causes the time breaking phenomenon when the electricity is connected. It is necessary to cut a section of the wire of the plug end and connect the wire to the plug.

3. Turn off the socket screw after power failure, remove the socket cover, and use the sharp nose pliers to close the two copper clippers of the plug, so that the plug contacts can be reliably contacted after being inserted into the socket.

4. Open the socket, re connect the socket power cord, and tighten the screws.

In the process of industrial electricity, a high concentration of dust will trigger an explosion, if touched to a water source, it will trigger electricity. If contact to sparks is a serious fire, it is important to imagine the safety of industrial electricity. This waterproof Industrial Plugs And Sockets is not only a guarantee of industrial development, but also a guarantee. The workers' life is safe.