The terminals have universal mounting pins, so they can be installed on U NC 35 and G rail NC32. The closed screw guide hole ensures the ideal screwdriver operation. For multiple sections, terminals are equipped with unified accessories, such as end plates, partitions, etc. The potential distribution can be achieved by accessing a fixed bridge in the center of the terminal or a side inserted bridge element inserted into the wire cavity. The ground terminal and the N line slide block terminal are identical with the common terminals. The identification system ZT can be used to realize uniform identification and enhance the stereo sense of the wiring system.

The Wire Connectors Terminal must correspond to the wire on the wire terminal of the electric heater to eliminate the short circuit accident caused by the pressure wire. The ceramic material, similar material, or insulating bead that are not tightly sintered can not be used as additional insulation or to strengthen the insulation. The basic reason is that the similar material is similar to the material, and in the process of burning, there are often holes or bubbles in the material. If you enter a wet or storage environment, the performance of the material is often affected, so if the similar material is to be used as an additional or reinforced insulation, it is usually soaked in red medicine to analyze whether it is tightly sintered. Not because of the problem of brittle material, brittle and brittle is a subjective judgment, which can generally be tested by shock, and we may think that it meets the requirements of mechanical strength.